Bratz Boyz Clothes

I may not care much for the Bratz Boyz dolls, but I sure do like their clothes!  I am so happy that Dylan and friendz have so many options available, because that means that my boy dolls have the same options!

Here are some photos of some of my boys in Bratz Boyz fashions.  From left to right:  Play Sportz Dylan in his original outfit, Clawd Wolf wearing Bratz Boyz pants (way too short) and jacket, HSM Chad in Bratz Boyz shirt (pants will not fit), Bob Scout, Dave Cub Scout, Todd Brown, and Harry Potter.

Bratz Boyz clothes are also good for my little men (especially the ones that play young boys in my stories).  Pictured below from left to right:  "Deon" (Lil' Penny), Heroes in Action Barack Obama, Playmates Toys Michel Jackson (who really strenuously disagrees to being placed in these clothes), Space Jam Michael Jordan Tee Time, and my little chubby guy.

Sometimes my teen girls find the Bratz Boyz clothes useful, also.  From left to right:  Skipper, Flavas Kiyoni Brown, HSM Sharpay, Calista, Hispanic everGirl, Wee Three Friends Janet, and Flavas Tika.

Have you found any other good clothing lines for your 'tween and teen boys?

Small Girl Dolls Comparisons

I have a request on my Comparisons page to do an articulation comparison with some of my younger dolls.  The girls below will get us started.  They all have the ability to bend at the knees and elbows at the least, and they are the shortest girls that I have that have this ability.  They are from left to right:  Mattel Janet, Juku Couture Kana, Only Hearts Club Briana Joy, Kenya Fashion Madness Keyshia, Bratz doll with Hottiez Kiara head, and Winx Club Layla.  

I am posing them similarly to my previous figure comparisons.  Some of these young ladies have appeared in other comparisons, but they wanted to come back for comparisons with dolls their own size.  Janet, Kana, Keyshia, and Kiara can all stand on their own without assistance from a doll stand.  Briana Joy can stand with shoes and her feet can adjust to heel height, so she can stand in both flat and heeled shoes. 

Here they are showing their flexed arms.  Janet, Kana, Keyshia, and Kiara have jointed elbows.  Briana Joy has a cloth body over a wire armature.  Layla has vinyl over wire for her limbs.  Janet is able to flex her arm further and hold it in position better than the others

None of them are able to cross their arms completely, but Janet comes the closest.  Janet, Kana, Briana Joy, and Keyshia can share shoes.  Kiara's Bratz body has large feet (shoes) that can be removed.  Layla has heeled feet and can wear some of the larger Barbie shoes.  Janet and Kana have articulation at the ankle.

Here they are doing a side stretch.  Janet and Kana have lower torso articulation, while Kiara is articulated at the chest.  I think that Janet has the best range of motion here.

Here they are in the "walk like an Egyptian" pose.  Kana and Kiara have articulation at the wrist.  Briana Joy's feet can be flexed.  Kiara's removable feet can swivel.  I think that Kana does this move the best.  What do you think?

Here they are doing kneeling back bends.  Janet does this the best.

Here they are showing off their hands.  None of these dolls can grip objects (no big surprise there).  Janet's hands are my favorites from this group.

Here they are attempting to sit cross-legged on the floor.  Briana Joy does this the best.

 Here they are attempting to do middle splits.  Kiara does this the best.

 Here they are attempting to do front splits.  Keyshia does this the best.

 Here they are doing a leg lift.  Kana and Briana Joy do this the best.

 Here they are sitting down.  Kana's legs will not close while seated.  Layla has issues when it comes to siting down (she might do better on a higher surface.  Keyshia looks the most natural to me in her seated position.

Do you have a favorite among these dolls?  What makes that particular doll stand out for you?  Which ones pose the best?  Which ones look the best?  Which dolls are the most realistic?

Doll Head Removal

I have had several people ask me about head removal and head swapping for various dolls, so I will share what has worked for me (and what has gone wrong for me).

The Heat Is On

Plan on using heat to make it easier to remove the head.  Applying heat to the head prior to removal softens the plastic and makes it easier to manipulate.  Methods that I have used include:

• Use a handheld hairdryer pointed towards the lower part of the doll's head and the upper neck.  Heat from this source will damage a doll's hair, so be sure to cover the hair while the dryer is in use.  Heat for approximately 60 seconds.

Or

• Place the doll head first into a plastic baggie that can withstand heat (like a freezer bag).  Submerge the doll's head and shoulders into boiling hot water.  For dolls with hard vinyl heads like Fashion Royalty, submerge for approximately 5 minutes.  Make sure that water does not get into the baggie.

Tools

There are some tools that will come in handy with certain head removals.  I have a set of small screwdrivers that I frequently use.  I also have a set of crochet needles - the smallest of which I find very useful.

Barbie and Friends

Barbie's neck post consists of a small plastic disk with 2 prongs just above that.  After heating the head, tug the head gently until the plastic disk is exposed, as in the photo below.

That was the easy part.  It can be a little tricky getting the prongs out, so use care.  Position one of the prongs so that it is pointed towards the doll's chin.  Squeeze the head to elongate the neck hole, and maneuver that side of the prong out of the neck hole.  Once one side of the prong is out, the other side will come out easily.  If you have trouble getting the prong out, use a tool like the ones mentioned above to help you to guide one side of the prong out of the doll's neck hole.

Once the doll's head has been removed, you can use a set of toenail clippers to cut the prongs off so that it will be easier to remove the head next time.  I usually do not remove the prongs, which is why this happened:

The small plastic rod that held the neck post firmly in place snapped, and the entire neck post came out.  I put the neck post back inside the neck, and put the doll's head back on.  You can't tell by looking at her or posing her, but she is damaged goods, which will be an issue if I ever decide to do another head swap with this particular doll.

Mixis

The Mixis dolls are unique.  There is a thick elastic band that extends from the neck and goes through a hole in a flat plastic disk, and the band is tied in a knot on top of the disk.  The disk holds the doll's head in place.  To remove this head, I used my smallest crochet needle.  After heating the doll's head, tug slightly to reveal the elastic band.

Barbie head being removed from Mixis body

Insert the crochet needle into the doll's head through the neck opening, and turn the plastic disk to the side.  Then, grab the opposite side of the disk with the hook, squeeze the doll's head so that the neck hole is elongated, and slide the disk out.

Kenya

Kenya doll heads are very difficult to remove, so use extreme caution if you do not want to do damage to the head or the body.  The Kenya neck post is a set of double prongs that extend like hooks (see photo in the table below).  After heating the doll head, use the smallest size screwdriver (like the size for watch screws) and insert that into the doll head at the neck opening.  Find one side of a bottom prong and carefully guide the doll's head over it.  Do the same with the other side.  Then do the same for the second set of prongs.

What to Expect

For me, one cause of apprehension comes from not knowing what type of neck post to expect when I make the decision to remove a doll's head.  Here are some of the neck posts that I've encountered so far:

American Champions - Barbie heads will fit on this body, and vice versa
Barbie - See instructions for Barbie and Friends above.
BFC, Ink - The neck post on this doll is nearly the same as Bratz dolls.
Blythe - Barbie heads will fit on a Blythe body.
Bratz - Bratz heads fit BFC, Ink dolls, and vice versa.
Bratz Kidz - Bratz Kidz heads fit on Sparkle Girlz bodies, and vice versa.
Disney Descendants - Barbie heads will fit on this body, and vice versa
Holly Hobbie & Friends - Mattel - The same as Barbie. Barbie heads will fit on this body, and vice versa
Integrity Toys - Barbie heads will fit on this body, and vice versa
Jakks Pacific - Other doll heads will fit on this body, but may sit a bit high on the neck.
Juku Couture - The head can be difficult to remove because of the small neck hole and the hard vinyl of the doll's head.
Kenya - See instructions for Kenya above.  Barbie heads will fit on Kenya, and vice versa.
Keyshia - Similar to Mattel's Janet, Todd, and Stacy
Liv - Slightly smaller neck post than Barbie.  Perfect fit for Skipper-sized dolls and HSM dolls.
Mattel High School Musical, Hadley and Isla - See instructions for Barbie and Friends above.  The HSM neck post is slightly larger than the other 2.  Hadley and Isla have the same size neck post as Janet (Stacy) and Todd.	From left to right: HSM, Isla, Hadley
Mattel Mermaid (small) - The head of this doll will fit loosely on the Juku Couture body, but Juku Couture heads will not fit on this body without modification.
Mattel Todd and Janet (Stacy) - May or may not have a pronged neck post (see instructions for Barbie and Friends above).
Mixis - See instructions for Mixis above.  Do not perform too many head removals with these, as the elastic band will fray over time.
Monster High - The tall neck post makes the head even more difficult to remove (see instructions for Barbie and Friends above).
Only Hearts Club - Be careful of the doll's eyes when you are removing the head.
Sparkle Girlz - Sparkle Girlz heads will fit on Bratz Kidz bodies, and vice versa.
Wee Three Friends - See instructions for Barbie and Friends above.  The neck post is about the same size as Barbie's.
Doll Heads – From left to right:  Monster High, Only Hearts Club, Barbie, Juku Couture, and Wee Three Friends.

Head Swapping Doll Heads to Action Figure Bodies

Here are some items that may come in handy if you want to use a doll head with an action figure body, but you do not want to make permanent modifications:

• Small plastic grapes from the Arts and Crafts store
• Flat washers from a tub and shower repair kit

I learned the plastic grape method from Seneschal of Avalon.  It is the method that I used when I put Opal's head on an action figure body.  The action figure body that I used has a cone-shaped neck post, and Opal's head would not stay on.  Use a small (1/2 inch diameter) plastic grape over the neck post.

Once I placed the small plastic grape over the neck post, Opal's head fit perfectly and it has full range of motion.

I used the same method for Tariq when I moved his head to an action figure body.  But in his case, the head was still a bit wobbly after attaching the small plastic grape.  I used a flat washer along with the grape, and the wobble is gone (at least I think that this is a flat washer - someone correct me if I'm wrong).

Tariq after the procedure

Have you found other common household items useful when rebodying dolls?  Tell me what you've used!

Swapping Female Hot Toys Head to Other Action Figure

Hot Toys female figures come with a ball and socket neck attachment, so they are different than other action figures with the cone-shaped neck post. The plastic grape method will not work.

Neck post for a Triad Alpha body

 Triad Alpha head on the left, Hot Toys head on the right

 I asked for help from fellow collector Codename Silent G and he told me about this method. I purchased some vinyl shelf caps from Home Depot. I purchased a pack with large and small caps because that's all they had, but I only needed the small ones.

I gathered the items that I would need:  a vinyl shelf cap, a ruler, scissors, something sharp and sturdy enough to cut through hard plastic (I used garden shears, but wire cutters will also work), and a metal nail file (sandpaper would probably work better).

I cut off the bottom 1/16" of one of the shelf caps with scissors. Then I cut off the top 1/16" of the neck knob of the Alpha body with the garden shears. I used the metal nail file to smooth out the neck knob after I had cut off the tip.

I submerged the shelf cap in boiling hot water for 1 minute, and then I pushed it down on the Alpha neck post as far as it would go. This turned the neck post into a vinyl ball that would grip the inside socket of the Hot Toys head. Then I attached the head, and it is now securely attached and has full range of motion.

Hot Toys Sheva Alomar head on Triad Alpha body

Important:  I am not an expert.  If you choose to remove your doll's head, you risk doing permanent and irreparable damage to your doll, like I did to my Hottiez Kiara doll below: