Teen Girl Doll Comparisons

Here are some teen girl doll comparisons.  A couple of them were in previous comparisons, but I wanted to put them with other similarly sized dolls.  They are from left to right:  Wee Three Friends Janet, Super Model Bel doll with Calista head, Hispanic everGirl, Flavas Kiyoni Brown, V.I.P. A.N.T. Farm Chyna, and Sashabella Paws.

Calista is the only one that can stand on her own in bare feet.  The others can stand in certain shoes.

Here they are showing their elbow flexibility.  They all have jointed elbows.  Sashabella Paws has the most flexibility in this pose.

Here they are sitting on the floor trying to cross their arms while showing their feet.  Sashabella Paws comes the closest to being able to cross her arms.  Janet has very large feet and can share shoes with Ken.  The others have doll friends that they can share shoes with.  Calista has arched feet and articulation at the ankle, so she can wear flat or heeled shoes.

Here they are doing a side stretch.  Calista and Sashabella have articulation at the lower torso, while  Kiyoni and Chyna have articulation at the upper torso.  Kiyoni's side arch is the most impressive.

Here they are in the "walk like an Egyptian" pose.  Calista and Sashabella have articulation at the wrists, while the others do not.  As previously stated, Calista also has articulation at the ankles.  I think that Sashabella does this the best.  What do you think?

Here they are attempting kneeling back bends.  Janet, Hispanic everGirl (does anyone know which one she is - Joy, Hope, Skye, or Starr), and Kiyoni have clicky knees and can not kneel.  Chyna does this pose the best.

Here they are showing off their hands.  None of them are able to grasp objects in their hands.  I like Calista's hands the best.

Here they are attempting to sit cross-legged on the floor.  Calista does this the best.

Here they are attempting to do middle splits.  It's close between Calista and Sashabella, but I think that Calista does this slightly better.

 Here they are doing front splits.  Kiyoni does this the best.

 Here they are doing a leg lift.  Janet does this the best.

Here they are sitting down.  Since Calista, Chyna, and Sashabella have articulation at the knees, they look more natural in seated positions.  

 Do you have a favorite among these dolls?  What makes that particular doll stand out for you?  Which ones pose the best?  Which ones look the best?  Which dolls are the most realistic?

Calista's Diary Entry - Kiss and Tell

Dear Diary,

Big Janet and Dylan are clearly a couple now.  Me and Kana and Briana Joy had been trying to ask her about what happened at the Halloween Carnival, but whenever we saw her at school she would say "Not here!  Not now!".  It seems like she's been too busy to hang out with us after school.  It seems like any time we see her outside of school now, she's hugging or holding hands with Dylan.  We were finally able to catch up with her today, though, and we hung out at my house.  Needless to say, we had a lot of questions!

Kana:  Ok, you'd better spill it.
Big Janet:  What?
Kana:  Let's start with what the heck happened at the Halloween Carnival, inside the haunted house, to be specific.
Briana Joy:  And don't hold anything back, either.  We want the details.
Big Janet:  Ok, the ride started and we went through a big set of double doors.  It was pitch black inside.  Then all of a sudden this bright spotlight came on and we saw a coffin, which opened and...
Me:  Did he kiss you?
Big Janet (blushing):  Yes.
Me, Kana, and Briana Joy:  Ooooooooooooooooooooo!!!

Big Janet (giggling):  I don't know why you're surprised!  We've kind of been flirting with each other for a while.  Remember the Valentine's Day party?  I almost kissed him back then!

Briana Joy:  But he's older!
Big Janet:  He's not that much older than me.
Kana:  Ok, finish telling the story!  I still want the details.

Big Janet told us that after her first big fright inside the Haunted House, she had screamed, and Dylan put his arm her and she moved over closer to him.  At one point, she closed her eyes and laid her head on his shoulder, not wanting to see what was coming next.  She could tell that he was moving his head closer to hers, and when she raised her head, he kissed her right on the lips.  Well, he missed at first, but then he kissed her and she kissed him back and they kept kissing for the rest of the ride.  After the carnival, Dylan had sent her a text message that said "So you're my girl, right?" and Big Janet texted him back saying "Yes."

Big Janet is the first one out of the four of us who has ever kissed a boy, so she had to deal with a lot of questions from us.  "Was it wet?"  "Was it gross?"  "How did it feel?" etc.  She answered all of our questions and gave us as many details as we wanted.

After the girls left, I stayed in my room for a while just thinking about things.  I can't believe that Big Janet is the first one out of our group of friends to have a boyfriend.  I'm not saying that in a mean way.  It's just that I always kind of thought that it would be me. 

Doll Head Removal

I have had several people ask me about head removal and head swapping for various dolls, so I will share what has worked for me (and what has gone wrong for me).

The Heat Is On

Plan on using heat to make it easier to remove the head.  Applying heat to the head prior to removal softens the plastic and makes it easier to manipulate.  Methods that I have used include:

• Use a handheld hairdryer pointed towards the lower part of the doll's head and the upper neck.  Heat from this source will damage a doll's hair, so be sure to cover the hair while the dryer is in use.  Heat for approximately 60 seconds.

Or

• Place the doll head first into a plastic baggie that can withstand heat (like a freezer bag).  Submerge the doll's head and shoulders into boiling hot water.  For dolls with hard vinyl heads like Fashion Royalty, submerge for approximately 5 minutes.  Make sure that water does not get into the baggie.

Tools

There are some tools that will come in handy with certain head removals.  I have a set of small screwdrivers that I frequently use.  I also have a set of crochet needles - the smallest of which I find very useful.

Barbie and Friends

Barbie's neck post consists of a small plastic disk with 2 prongs just above that.  After heating the head, tug the head gently until the plastic disk is exposed, as in the photo below.

That was the easy part.  It can be a little tricky getting the prongs out, so use care.  Position one of the prongs so that it is pointed towards the doll's chin.  Squeeze the head to elongate the neck hole, and maneuver that side of the prong out of the neck hole.  Once one side of the prong is out, the other side will come out easily.  If you have trouble getting the prong out, use a tool like the ones mentioned above to help you to guide one side of the prong out of the doll's neck hole.

Once the doll's head has been removed, you can use a set of toenail clippers to cut the prongs off so that it will be easier to remove the head next time.  I usually do not remove the prongs, which is why this happened:

The small plastic rod that held the neck post firmly in place snapped, and the entire neck post came out.  I put the neck post back inside the neck, and put the doll's head back on.  You can't tell by looking at her or posing her, but she is damaged goods, which will be an issue if I ever decide to do another head swap with this particular doll.

Mixis

The Mixis dolls are unique.  There is a thick elastic band that extends from the neck and goes through a hole in a flat plastic disk, and the band is tied in a knot on top of the disk.  The disk holds the doll's head in place.  To remove this head, I used my smallest crochet needle.  After heating the doll's head, tug slightly to reveal the elastic band.

Barbie head being removed from Mixis body

Insert the crochet needle into the doll's head through the neck opening, and turn the plastic disk to the side.  Then, grab the opposite side of the disk with the hook, squeeze the doll's head so that the neck hole is elongated, and slide the disk out.

Kenya

Kenya doll heads are very difficult to remove, so use extreme caution if you do not want to do damage to the head or the body.  The Kenya neck post is a set of double prongs that extend like hooks (see photo in the table below).  After heating the doll head, use the smallest size screwdriver (like the size for watch screws) and insert that into the doll head at the neck opening.  Find one side of a bottom prong and carefully guide the doll's head over it.  Do the same with the other side.  Then do the same for the second set of prongs.

What to Expect

For me, one cause of apprehension comes from not knowing what type of neck post to expect when I make the decision to remove a doll's head.  Here are some of the neck posts that I've encountered so far:

American Champions - Barbie heads will fit on this body, and vice versa
Barbie - See instructions for Barbie and Friends above.
BFC, Ink - The neck post on this doll is nearly the same as Bratz dolls.
Blythe - Barbie heads will fit on a Blythe body.
Bratz - Bratz heads fit BFC, Ink dolls, and vice versa.
Bratz Kidz - Bratz Kidz heads fit on Sparkle Girlz bodies, and vice versa.
Disney Descendants - Barbie heads will fit on this body, and vice versa
Holly Hobbie & Friends - Mattel - The same as Barbie. Barbie heads will fit on this body, and vice versa
Integrity Toys - Barbie heads will fit on this body, and vice versa
Jakks Pacific - Other doll heads will fit on this body, but may sit a bit high on the neck.
Juku Couture - The head can be difficult to remove because of the small neck hole and the hard vinyl of the doll's head.
Kenya - See instructions for Kenya above.  Barbie heads will fit on Kenya, and vice versa.
Keyshia - Similar to Mattel's Janet, Todd, and Stacy
Liv - Slightly smaller neck post than Barbie.  Perfect fit for Skipper-sized dolls and HSM dolls.
Mattel High School Musical, Hadley and Isla - See instructions for Barbie and Friends above.  The HSM neck post is slightly larger than the other 2.  Hadley and Isla have the same size neck post as Janet (Stacy) and Todd.	From left to right: HSM, Isla, Hadley
Mattel Mermaid (small) - The head of this doll will fit loosely on the Juku Couture body, but Juku Couture heads will not fit on this body without modification.
Mattel Todd and Janet (Stacy) - May or may not have a pronged neck post (see instructions for Barbie and Friends above).
Mixis - See instructions for Mixis above.  Do not perform too many head removals with these, as the elastic band will fray over time.
Monster High - The tall neck post makes the head even more difficult to remove (see instructions for Barbie and Friends above).
Only Hearts Club - Be careful of the doll's eyes when you are removing the head.
Sparkle Girlz - Sparkle Girlz heads will fit on Bratz Kidz bodies, and vice versa.
Wee Three Friends - See instructions for Barbie and Friends above.  The neck post is about the same size as Barbie's.
Doll Heads – From left to right:  Monster High, Only Hearts Club, Barbie, Juku Couture, and Wee Three Friends.

Head Swapping Doll Heads to Action Figure Bodies

Here are some items that may come in handy if you want to use a doll head with an action figure body, but you do not want to make permanent modifications:

• Small plastic grapes from the Arts and Crafts store
• Flat washers from a tub and shower repair kit

I learned the plastic grape method from Seneschal of Avalon.  It is the method that I used when I put Opal's head on an action figure body.  The action figure body that I used has a cone-shaped neck post, and Opal's head would not stay on.  Use a small (1/2 inch diameter) plastic grape over the neck post.

Once I placed the small plastic grape over the neck post, Opal's head fit perfectly and it has full range of motion.

I used the same method for Tariq when I moved his head to an action figure body.  But in his case, the head was still a bit wobbly after attaching the small plastic grape.  I used a flat washer along with the grape, and the wobble is gone (at least I think that this is a flat washer - someone correct me if I'm wrong).

Tariq after the procedure

Have you found other common household items useful when rebodying dolls?  Tell me what you've used!

Swapping Female Hot Toys Head to Other Action Figure

Hot Toys female figures come with a ball and socket neck attachment, so they are different than other action figures with the cone-shaped neck post. The plastic grape method will not work.

Neck post for a Triad Alpha body

 Triad Alpha head on the left, Hot Toys head on the right

 I asked for help from fellow collector Codename Silent G and he told me about this method. I purchased some vinyl shelf caps from Home Depot. I purchased a pack with large and small caps because that's all they had, but I only needed the small ones.

I gathered the items that I would need:  a vinyl shelf cap, a ruler, scissors, something sharp and sturdy enough to cut through hard plastic (I used garden shears, but wire cutters will also work), and a metal nail file (sandpaper would probably work better).

I cut off the bottom 1/16" of one of the shelf caps with scissors. Then I cut off the top 1/16" of the neck knob of the Alpha body with the garden shears. I used the metal nail file to smooth out the neck knob after I had cut off the tip.

I submerged the shelf cap in boiling hot water for 1 minute, and then I pushed it down on the Alpha neck post as far as it would go. This turned the neck post into a vinyl ball that would grip the inside socket of the Hot Toys head. Then I attached the head, and it is now securely attached and has full range of motion.

Hot Toys Sheva Alomar head on Triad Alpha body

Important:  I am not an expert.  If you choose to remove your doll's head, you risk doing permanent and irreparable damage to your doll, like I did to my Hottiez Kiara doll below: